Teeth Filling in Islamabad Painless Composite & Tooth Colored Fillings at OraDent
HomeServicesTeeth Filling- Home/
- Tooth Filling
Tooth Filling
A filling is used to treat a small hole, or cavity, in a tooth. To repair a cavity, a dentist removes the decayed tooth tissue and then fills the space with a filling material. There are several types of fillings, including amalgam and tooth colored options like composite resin and porcelain. Depending on the material used, some dental fillings can last up to 20 years.
At OraDent Dental ClinicIslamabad, dental fillings are performed by PMDC registered dental surgeons at our F 8 Markaz and I 8 Markaz branches using tooth colored composite resin and other premium filling materials to restore cavities, cracked teeth, and worn tooth structure with natural looking, long lasting results.
Tooth fillings at OraDent Islamabad start from PKR 5,000 per tooth for simple composite fillings with all pricing confirmed at your appointment before treatment begins. Same day fillings are available for most cavity cases. Open until 11:30 PM no need to take time off work for dental care.
Expert Teeth Filling in Islamabad at OraDent Dental Clinic
Teeth Filling at OraDent Islamabad — At a Glance
| Composite Filling Cost | PKR 5,000 – 12,000 per tooth |
|---|---|
| Glass Ionomer Filling Cost | PKR 4,000 – 8,000 per tooth |
| Amalgam Filling Cost | PKR 3,000 – 6,000 per tooth |
| Ceramic/Porcelain Filling Cost | PKR 10,000 – 20,000 per tooth |
| Inlay/Onlay Cost | PKR 15,000 – 35,000 per unit |
| Session Duration | 20–60 minutes per tooth |
| Visits Required | 1 visit (most fillings) |
| Composite Lifespan | 5–10 years |
| Amalgam Lifespan | 10–15 years |
| Ceramic/Porcelain Lifespan | 15–20 years |
| Anesthesia | Local anesthesia – pain free |
| Hours | Mon–Thu & Sat: 11:30 AM – 11:30 PM |
Signs You May Need a Tooth Filling in Islamabad
Many people delay dental treatment because they are unsure whether their symptoms require a filling. At OraDent Islamabad, we recommend visiting our dental team if you experience any of the following:
Visible Dark Spot or Hole in a Tooth
Toothache or Spontaneous Pain
Sensitivity to Sweet Foods
Sensitivity to Hot and Cold
Food Consistently Getting Stuck
Old Filling Is Chipped, Cracked, or Fallen Out
Detected on Routine Dental X-Ray
Early diagnosis can help preserve more of your natural tooth structure and prevent a simple cavity from progressing into a more complex dental problem.
Tooth Filling Procedure, Materials & Aftercare
Materials – Types of Dental Fillings Available at OraDent Islamabad
Choosing the right filling material depends on the cavity location, size, chewing pressure requirements, and your aesthetic preference. At OraDent Islamabad, your PMDC registered dentist explains all suitable options at your consultation, recommending the best balance of aesthetics, durability, and cost.
Composite Resin Fillings (Tooth Colored) – Most Popular
Composite resin is the most widely used filling material at OraDent Islamabad – a mixture of acrylic resin and fine glass particles that is shade matched to your exact tooth color, making it completely invisible against natural enamel.
How it works: The composite is applied in layers and cured (hardened) with a blue light curing lamp – each layer is bonded directly to the tooth structure. The final surface is shaped and polished to blend seamlessly with surrounding tooth anatomy.
Best for: Front teeth, visible teeth, small to medium cavities, cosmetic repair of chipped or worn teeth.
Advantages: Invisible, bonds to tooth structure, requires less removal of healthy enamel than amalgam, same-day single-visit placement, and can also repair chips, gaps, and wear.
Lifespan: 5–10 years
Cost at OraDent Islamabad: PKR 5,000 – 12,000 per tooth
Amalgam Fillings (Silver Fillings) – Most Durable
Amalgam is a mixture of metals – silver, tin, copper, and mercury – that has been used in dentistry for over 150 years. Despite its silver-colored appearance, amalgam remains one of the most durable and cost-effective filling options for back teeth.
Best for: Large cavities in molars and premolars, high-pressure chewing areas, and patients requiring maximum durability at lower cost.
Advantages: Extremely durable, long lifespan, cost effective, and self-sealing properties that resist recurrent decay at the margins.
Limitations: Silver color is visible and not suitable for front teeth or visible areas. Requires slightly more tooth removal than composite bonding technique.
Lifespan: 10–15 years
Cost at OraDent Islamabad: PKR 3,000 – 6,000 per tooth
Glass Ionomer Fillings – Fluoride Releasing
Glass ionomer cement (GIC) is a water-based material that releases fluoride ions continuously after placement, providing an ongoing protective effect against recurrent decay at the filling margins.
Best for: Children's milk teeth, small cavities near the gumline, patients with high cavity risk, and areas not subject to heavy chewing pressure.
Advantages: Fluoride release, bonds to tooth without etching, gentle on tooth structure, and suitable for very young children who need a simple filling under brief appointment conditions.
Lifespan: 5–7 years
Cost at OraDent Islamabad: PKR 4,000 – 8,000 per tooth
Ceramic / Porcelain Fillings – Premium Aesthetics
Ceramic fillings, also called porcelain inlays, are laboratory-fabricated restorations milled from dental-grade ceramic, providing a natural appearance and high stain resistance.
Best for: Patients prioritizing aesthetics with large cavities in visible premolars, patients who stain easily, and those wanting a long-lasting tooth-colored restoration.
Advantages: Natural appearance, highly stain resistant, durable, and biocompatible.
Lifespan: 15–20 years
Cost at OraDent Islamabad: PKR 10,000 – 20,000 per tooth
Bulk Fill Composite – Advanced Option for Large Cavities
Bulk fill composite is a newer generation of composite resin engineered with improved light transmission, allowing placement in a single deep layer rather than traditional multiple increments.
Best for: Large cavities in back teeth requiring deep cavity filling in fewer steps and patients with time constraints.
Cost at OraDent Islamabad: PKR 7,000 – 14,000 per tooth
Inlays and Onlays – Alternative for Large Cavities
When a cavity is too large for a conventional direct filling but not large enough to require a full crown, an inlay or onlay can provide a laboratory-fabricated restoration custom made to fit precisely into or over the cavity.
Best for: Large cavities where a conventional filling is insufficient but enough healthy tooth structure remains to avoid a full crown.
Advantages: Stronger and longer lasting than direct fillings for large cavities while being more conservative than a crown.
Cost at OraDent Islamabad: PKR 15,000 – 35,000 per unit
Procedure – How Teeth Filling is Done at OraDent Islamabad
Diagnosis & Digital X-Ray
Local Anesthesia
Cavity Preparation & Decay Removal
Liner/Base Placement
Filling Placement
- Composite: Applied in increments and light cured before the next layer is placed.
- Amalgam: Packed and condensed into the cavity and carved to the correct anatomy.
- Glass Ionomer: Mixed, placed as a paste, and allowed to set before finishing.
Shaping, Bite Check & Polishing
Total appointment time: 20–60 minutes per tooth. Most fillings are completed in a single visit.
Longevity – How Long Do Dental Fillings Last?
The lifespan of a filling varies depending on the material used, location of the filling, cavity size, and oral hygiene habits.
| Filling Material | Average Lifespan | Key Factor |
|---|---|---|
| Composite Resin | 5–10 years | Oral hygiene, cavity size, location |
| Glass Ionomer | 5–7 years | Not ideal under heavy chewing |
| Amalgam (Silver) | 10–15 years | Most durable for back teeth |
| Bulk Fill Composite | 7–12 years | Improved depth cure technology |
| Ceramic Inlay/Onlay | 15–20 years | Lab fabricated precision fit |
| Gold Inlay/Onlay | 20–30 years | Most durable, highest cost |
Replacing Fillings
Over time, fillings may wear down, chip, or develop decay around their edges. Regular dental checkups allow your dentist to identify problems before they become larger issues.
Aftercare
After getting a filling, you may experience sensitivity to hot or cold foods and drinks for a few days. Good oral hygiene, including regular brushing and flossing, helps protect the restoration.
Local anesthesia numbness lasts 2–4 hours. Avoid eating until sensation fully returns.
Composite fillings are fully hardened immediately after light curing and can be used once numbness wears off.
Amalgam fillings require around 24 hours to fully harden, so avoid chewing on that side during this period.
Mild sensitivity to hot, cold, sweet, or pressure for 2–7 days can be normal, particularly after deep fillings.
Use sensitivity toothpaste containing potassium nitrate for 1–2 weeks if needed.
Avoid very hot or very cold foods for the first 48 hours.
Resume normal brushing and flossing immediately using a soft-bristle toothbrush and fluoride toothpaste.
Avoid hard foods such as ice, nuts, and hard candy, especially during the first few days.
Avoid excessive teeth grinding and discuss a night guard with your dentist if you grind your teeth.
Attend 6-monthly dental checkups and scaling at OraDent Islamabad.
Cosmetic Considerations
Fillings can improve tooth appearance by blending with natural tooth color. Some patients may experience temporary sensitivity after receiving a filling.
At OraDent Islamabad, composite resin color is matched to your exact tooth shade using a clinical shade guide, helping filled teeth blend naturally with adjacent teeth.
Dental Bonding
Correcting chipped, worn, or slightly misaligned teeth using composite resin without significant tooth removal.
Diastema Closure
Filling gaps between front teeth with composite for an immediate and affordable cosmetic result.
Tooth Reshaping
Adding or contouring tooth structure for length, symmetry, or shape correction.
For patients concerned about aesthetics, composite fillings on front teeth can later be upgraded to ceramic inlays or porcelain veneers for longer-lasting, more stain-resistant cosmetic results.
Understanding Cavity Classification – Which Filling Does Your Cavity Need?
Dental cavities are classified by their location and extent. The cavity classification helps your dentist determine which filling material and restoration technique is most appropriate.
| Cavity Class | Location | Description | Best Filling |
|---|---|---|---|
| Class I | Chewing surface (pit & fissure) | Cavities in grooves on top of back teeth. | Composite or amalgam |
| Class II | Between tooth surface of molars/premolars | Most common side-surface cavities of back teeth; often require a larger filling. | Composite, amalgam, or inlay |
| Class III | Between tooth surface of front teeth | Cavities between incisors and canines in an aesthetic area. | Composite (tooth colored only) |
| Class IV | Corner of front tooth (incisal edge) | Chipped or broken front tooth corner involving the incisal edge. | Composite bonding |
| Class V | Gumline (cervical cavity) | Cavities at the neck of the tooth near the gumline. | Glass ionomer or composite |
| Large / Complex | Multiple surfaces | Cavities spanning three or more surfaces of one tooth. | Inlay, onlay, or crown |
Why Early Treatment Matters
The larger and deeper the cavity, the more tooth structure is lost, making the restoration progressively more complex and costly. A small Class I cavity treated early at OraDent Islamabad may require only a simple filling. If left untreated, it can progress to a larger cavity requiring an inlay or onlay, or eventually a root canal and crown if the dental pulp becomes infected.
Early diagnosis helps preserve natural tooth structure, reduce treatment complexity, and prevent unnecessary pain and expense.
Understanding Cavity Classification – Which Filling Does Your Cavity Need?
Dental cavities are classified by location and extent – determining which filling material and technique is most appropriate.
| Cavity Class | Location | Description | Best Filling |
|---|---|---|---|
| Class I | Chewing surface (pit & fissure) | Cavities in grooves on top of back teeth | Composite or amalgam |
| Class II | Between tooth surface of molars/premolars | Most common – side surfaces of back teeth; often need larger filling | Composite, amalgam, or inlay |
| Class III | Between tooth surface of front teeth | Incisors and canines; aesthetic area | Composite (tooth colored only) |
| Class IV | Corner of front tooth (incisal edge) | Chipped or broken front tooth corner | Composite bonding |
| Class V | Gumline (cervical) cavity | Cavities at the neck of the tooth near the gum | Glass ionomer or composite |
| Large/Complex | Multiple surfaces | Cavity spanning 3+ surfaces of one tooth | Inlay, onlay, or crown |
Note: The larger and deeper the cavity, the more tooth structure is lost – making the restoration progressively more complex and costly. A small Class I cavity treated today at OraDent Islamabad for PKR 5,000 can become a Class II or III cavity requiring a PKR 15,000–25,000 inlay – or a root canal + crown at PKR 30,000–80,000 – if left untreated for 1–2 years.
Why Choose OraDent for Teeth Filling in Islamabad?
Conservative Cavity Removal – Maximum Tooth Preservation
OraDent dentists use air abrasion and hand excavators alongside conventional drilling to remove only decayed tissue, preserving as much healthy natural tooth structure as possible. The more natural tooth structure preserved, the stronger and longer lasting your filling.
Premium Filling Materials
OraDent uses internationally certified composite resin, glass ionomer, and ceramic filling materials, providing the color stability, surface hardness, and marginal integrity that lower grade materials cannot achieve. Premium materials directly translate to longer filling lifespan and fewer replacement appointments.
Shade Matched, Invisible Results
Every composite filling at OraDent is shade matched to your specific tooth color using a clinical shade guide, ensuring the filled tooth is indistinguishable from adjacent natural teeth.
FCPS Endodontists for Deep Cavity Cases
When a cavity is close to the dental pulp, requiring a liner and careful technique to avoid inadvertent pulp exposure, OraDent's three FCPS Endodontists — Dr. Kaynaat Zamir, Dr. Syed WaliUllah Shah, and Dr. Baria Zareef — provide specialist level management of deep cavity cases that reduces the risk of post filling sensitivity and avoidable root canal treatment.
Same Day Filling – No Long Wait
Most cavity fillings at OraDent are completed in 20–60 minutes in a single appointment. No separate lab stage is required for direct composite fillings, allowing same day treatment in most cases.
Evening Hours – 11:30 PM
OraDent's F-8 and I-8 Markaz branches are open until 11:30 PM Monday through Saturday, making it possible to get your dental filling done after work or school without sacrificing professional or academic commitments.
WHO & PMC Compliant Sterilization
All instruments are autoclave sterilized between patients. Single-use items are used where required. Clinical infection control protocols follow WHO and Pakistan Medical Commission guidelines.
Why Choose Us?
OraDent Dental Clinic Provides top notch dental services, never compromising on the health, hygiene and comfort of its patients. We offer expertiese in a diverse spectrum of dental problem and oral surgery. OraDent Dental Clinic aims to provide the highest level of dental treatment by utilising the most appropriate and cost effective solution using infection control protocols following all the guidelines provided by WHO and PMC. We are a team of highly certified and Professional Staff and it is our utmost responsibility to listen to yours concerns and give you the most appropriate, cost effective treatment plan that you understand and agree with.
